Mercedes-Benz B-Class hatchback 2022 Owner's Manual page 218

% The vehicle is equipped with an electrical fuse
which protects it against overvoltage in the
mains supply. This electrical fuse may trip dur-
ing severe thunderstorms, for example, and
may cause the fuse in the building to trip or
may interrupt the charging process. These
functions protect the vehicle.
After the fuse in the building is switched on
again, the charging process resumes automat-
ically. Following an interruption in the power
supply without the fuse in the building being
tripped, it may take up to ten minutes for
charging to resume automatically.
Ending the alternating current charging process
(mode 2/3)
Requirements:
The distance between the key and the vehicle
R
does not exceed 1 m.
Combo 1 vehicle socket
Press charging interruption button 3.
#
or
Unlock the vehicle.
#
The charging process is ended. The % indi-
cator lamp 1 lights up white. The vehicle
socket is unlocked.
Driving and parking 215
% Vehicles equipped with a type 1 vehicle
socket for AC charging have no charging inter-
ruption button 3.
Press and hold button 2 on the charging
#
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
Remove the charging cable connector from
#
the mains socket, or from the socket on the
wallbox/charging station, and stow the vehi-
cle's charging cable safely in the vehicle
( page 203).
/