Hard Drive Extension Board (4730S Models) - HP PROBOOK 4530S Maintenance And Service Manual

Hard drive extension board (4730s models)

Description
Hard drive extension board
Before removing the hard drive extension board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Bottom door (see
b. Hard drive (see
c. Optical drive (see
d. WLAN module (see
e. WWAN module (see
f. Fan (see
g. Heat sink (see
h. Keyboard (see
i. Top cover (see
j. System board (see
Remove the hard drive extension board:
1. Position the system board upright with the right side toward you.
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
WLAN/Bluetooth combo card on page
WWAN module on page
Fan on page 93)
Heat sink on page
Keyboard on page
Top cover on page
System board on page
47).
49).
52)
50)
56)
95)
63)
65)
85)
Component replacement procedures
Spare part number
646291-001
58)
89