The Administration Tab - Diagnostics; Figure 6-50: The Administration Tab - Diagnostics; Figure 6-51: Ping Test; Figure 6-52: Traceroute Test - Linksys WRV200 User Manual

Wireless-G VPN Router with RangeBooster

The Administration Tab - Diagnostics

The Diagnostcs allow you to check the connections of your network components.
Ping Test
Ping Test Parameters
IP or URL Address. Enter the IP or URL address of the network device whose connection status you wish to test.
Packet Size. Enter the size of the ping packets.

Figure 6-50: The Administration Tab - Diagnostics

Times to Ping. Enter the number of times that you want to ping the device: 5, 10, 15. or Unlimited.
Click the Start to Ping button to start the test. The results of the test will be displayed in the window. To stop the
test, click the Stop button. Click the Clear Log button to clear the screen. Click the Close button to return to the
Diagnostics screen.
Traceroute Test
IP or URL Address. Enter the IP or URL address of the network device whose performance you wish to test.
Click the Start to Traceroute button to start the test. The results of the test will be displayed in the window. To

Figure 6-51: Ping Test

stop the test, click the Stop button. Click the Clear Log button to clear the screen. Click the Close button to
return to the Diagnostics screen.
For help information, click More.

Figure 6-52: Traceroute Test

Chapter 6: Configuring the Wireless-G VPN Router 54
The Administration Tab - Diagnostics