The Administration Tab - Log; Figure 6-49: The Administration Tab - Log - Linksys WRV200 User Manual

Wireless-G VPN Router with RangeBooster

The Administration Tab - Log

When you click the Administration tab, you will see the Log screen. The Log screen provides you with options for
email alerts and a log of all incoming and outgoing URLs or IP addresses for your Internet connection.
Log
Email Alert. To enable the Router to send email alerts in the event of Denial of Service attacks and the like, select
Enabled. If you do not wish to have email alerts, select Disabled. The router will send out e-mail logs to a
specific e-mail address.
Mail From. Enter the e-mail address so that the receiver can know where the mail is from.
Recipient To. Enter the e-mail address where you want the alerts to be sent.
Event Types. There are ACL, DoS, URL Detect and New Connection event types for E-Mail Alert. You can select

Figure 6-49: The Administration Tab - Log

some of them to enable those event alerts.
System Log. You may keep a log of the router's activities. This requires the installation of an external log viewer.
To enable System Log, click Enabled.
Logviewer IP Address. Enter the address where you want the system log to be send.
Event Types. There are System, ACL, DoS, URL Detect and New Connection event types for System Log. You can
select some of them to enable those event logs.
When you have finished making changes on this screen, click the Save Settings button to save the changes, or
click the Cancel Changes button to undo your changes. For help information, click More.
Chapter 6: Configuring the Wireless-G VPN Router 53
The Administration Tab - Log