The Administration Tab - Diagnostics; Figure 8-42: Administration Tab - Diagnostics; Figure 8-43: The Ping Test; Figure 8-44: The Traceroute Test - Linksys WRT54G3G-ST User Manual

Wireless-G Router for Mobile Broadband

The Administration Tab - Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. The
reboot
Ping Test
Ping Parameters. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test
screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it.
Then, click the Ping button. The Ping Test screen will then display the test results. To stop the test, click the Stop
button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics screen.

Figure 8-42: Administration Tab - Diagnostics

Traceroute Test
Traceroute Parameters. To test the performance of a connection, click the Traceroute button. Enter the address
of the PC whose connection you wish to test and click the Traceroute button. The Traceroute screen will then
display the test results. To stop the test, click the Stop button. Click the Clear Log button to clear the screen.
Click the Close button to return to the Diagnostics screen.

Figure 8-43: The Ping Test

Figure 8-44: The Traceroute Test

Chapter 8: Configuring the Wireless-G Router for Mobile Broadband 79
The Administration Tab - Diagnostics