Wireless-G VPN Router with RangeBooster
Windows 2000 or XP Instructions
1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.
Note: The MAC address is also called the Physical Address.
2. At the command prompt, enter ipconfig /all. Then press the Enter key.
3. Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet
adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
On the MAC Address/Physical Address screen, the example shows the Ethernet adapter's IP address as
192.168.1.100. Your computer may show something different.
Appendix F: Finding the MAC Address and IP Address for your Ethernet Adapter
Windows 2000 or XP Instructions
Figure F-3: MAC Address/Physical Address
101