The Administration Tab - Diagnostics; Figure 5-33: Administration Tab - Diagnostics; Figure 5-34: Ping Test; Figure 5-35: Traceroute Test - Linksys WRP200 User Manual

Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Diagnostics

The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components.
Ping Test. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test screen.
Enter the address of the PC whose connection you wish to test and how many times you wish to test it. Then,
click the Ping button. The Ping Test screen will then display the test results. Click the Close button to return to
the Diagnostics screen.
Traceroute Test. To test the performance of a connect, click the Traceroute button. Enter the address of the PC
Figure 5-34: Administration Tab - Diagnostics
whose connection you wish to test and click the Traceroute button. The Traceroute screen will then display the
test results. Click the Close button to return to the Diagnostics screen.
Figure 5-35: Ping Test
Figure 5-36: Traceroute Test
Chapter 5: Configuring the Router 37
The Administration Tab - Diagnostics