The Administration Tab - Factory Defaults; The Administration Tab - Firmware Upgrade; The Administration Tab - Reboot; Figure 6-53: The Administration Tab - Factory Default - Linksys WRV200 User Manual

Wireless-G VPN Router with RangeBooster

The Administration Tab - Factory Defaults

Note: Do not restore the factory defaults unless you are having difficulties with the Router and have
exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-enter all
of your configuration settings.
The Factory Defaults screen allows you to restore the Router's configuration to its factory default settings.
Restore Factory Defaults. To clear all of the Router's settings and reset them to its factory defaults, click this
button.

The Administration Tab - Firmware Upgrade

Note: The Router will lose all of the settings you have customized. Before you upgrade its firmware,
write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all
of your configuration settings.
The Firmware Upgrade screen allows you to upgrade the Router's firmware. Do not upgrade the firmware unless
you are experiencing problems with the Router or the new firmware has a feature you want to use.
Before upgrading the firmware, download the Router's firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Upgrade Firmware
In the field provided, enter the name of the extracted firmware upgrade file, or click the Browse button to find
this file. After you have selected the appropriate file, click the Start to Upgrade button, and follow the on-screen
instructions.
For help information, click More.

The Administration Tab - Reboot

To restart the Router, select Yes, then click the Save Settings button.
Chapter 6: Configuring the Wireless-G VPN Router
The Administration Tab - Factory Defaults

Figure 6-53: The Administration Tab - Factory Default

Figure 6-54: The Administration Tab - Firmware
Upgrade

Figure 6-55: The Administration Tab - Reboot

55