The Administration Tab - Diagnostics; Figure 5-33: Administration Tab -Diagnostics; Figure 5-34: Ping Test; Figure 5-35: Traceroute Test - Linksys WRTP54G User Manual

Wireless-G Broadband Router with 2 Phone Ports

The Administration Tab - Diagnostics

The diagnostic tests allow you to check the connections of your network components.
Ping Test
Ping Parameters. The Ping test will check the status of a connection. Click the Ping button to open the Ping
Test screen. Enter the IP address or domain name of the PC whose connection you wish to test. Enter the size of
Figure 5-33: Administration Tab -
the test packet. Then select the number of times you want the ping to occur. Click the Ping button. The Ping Test
Diagnostics
screen will then display the test results. Click the Close button to return to the Diagnostics screen.
Traceroute Test
Traceroute Parameters. To test the performance of a connect, click the Traceroute button. Enter the IP address
or domain name of the PC whose connection you wish to test. Click the Traceroute button. The Traceroute Test
screen will then display the test results. Click the Close button to return to the Diagnostics screen.

Figure 5-34: Ping Test

Figure 5-35: Traceroute Test

48
Chapter 5: Configuring the Router
The Administration Tab - Diagnostics