Appendix F: Finding The Mac Address And Ip Address For Your Ethernet Adapter; Windows 98 Or Me Instructions; Figure F-1: Ip Configuration Screen; Figure F-2: Mac Address/Adapter Address - Linksys WRV200 User Manual

Wireless-G VPN Router with RangeBooster
Appendix F: Finding the MAC Address and IP Address for
your Ethernet Adapter
This section describes how to find the MAC address for your computer's Ethernet adapter so you can use the MAC
filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer's
Ethernet adapter. This IP address is used for the Router's filtering, forwarding, and/or DMZ features. Follow the
steps in this appendix to find the adapter's MAC or IP address in Windows 98, Me, 2000, or XP.

Windows 98 or Me Instructions

1. Click Start and Run. In the Open field, enter winipcfg. Then press the Enter key or the OK button.
2. When the IP Configuration screen appears, select the Ethernet adapter you have connected to the Router via a
CAT 5 Ethernet network cable.
3. Write down the Adapter Address as shown on your computer screen. This is the MAC address for your
Ethernet adapter and is shown as a series of numbers and letters.
The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.
On the MAC Address/Adapter Address screen, the example shows the Ethernet adapter's IP address as
192.168.1.100. Your computer may show something different.
Note: The MAC address is also called the Adapter Address.

Appendix F: Finding the MAC Address and IP Address for your Ethernet Adapter

Windows 98 or Me Instructions

Figure F-1: IP Configuration Screen

Figure F-2: MAC Address/Adapter
Address
100