Security Tab For Other Switches - Acl Mapping; Figure 5-49: Fast Ethernet Security - Acl Mapping - Linksys SRW2016 User Manual

WebView Switches

Security Tab for Other Switches - ACL Mapping

When an ACL is mapped to an interface, the ACL is applied to the selected interface. Use the ACL Mapping
screen to assign ACL Lists to classification methods and interfaces.
The ACL Mapping page contains the following fields:
Interface. The VLAN to which the ACL is mapped.
ACL Name. The name of the ACL bound to the VLAN.
To modify the settings on this screen, click the Edit icon, which resembles a pencil, to open the edit screen.
To delete a mapped ACL, click the Remove icon, which appears as a red X.
Chapter 5: Using the Web-based Utility for Configuration
Security Tab for Other Switches - ACL Mapping
NOTE: This section does not apply to the SRW2048
Switch. If you have a SRW2048 Switch, refer to the
sections titled Security Tab for SRW2048 Switches.

Figure 5-49: Fast Ethernet Security - ACL Mapping

53