Switch Conf. (Configuration) Tab - Gvrp Parameters; Figure 5-14: Switch Configuration - Gvrp Parameters; Figure 5-15: Switch Configuration - Pve Mapping - Linksys SRW2016 User Manual

WebView Switches

Switch Conf. (Configuration) Tab - GVRP Parameters

The name of this section is different depending on the type of Switch you are using. Gigabit Ethernet Switches
show the GVRP Parameters screen. Fast Ethernet Switches show the PVE Mapping screen
GVRP Parameters - Gigabit Ethernet Switches ONLY
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to
bridge ports mapping, without having to individually configure each bridge and register VLAN membership.
GVRP Global Status. This indicates if GVRP is enabled on the Switch.
Interface. This dIsplays the interface/port on which GVRP is enabled.
GVRP State. This indicates if GVRP is enabled on the interface.
Dynamic VLAN Creation. This indicates if Dynamic VLAN creation is enabled on the interface.
GVRP Registration. This indicates if VLAN registration through GVRP is enabled on the interface.
To modify a GVRP, click the Edit icon, which looks like a pencil.
To apply changes made to a GVRP, click the Submit button.
Switch Conf. (Configuration) Tab - PVE Mapping
PVE Mapping performs the same functions on the Fast Ethernet Switch , as configuring a PVE uplink, using the
interface screen on GE devices.
Group ID. This indicates the Group mapped on the Switch.
Group Members. This dIsplays the ports associated with this Group.
PVE Uplink. This indicates the type of PVE uplink.
To modify a PVE, click the Edit icon, which looks like a pencil.
Chapter 5: Using the Web-based Utility for Configuration
Switch Conf. (Configuration) Tab - GVRP Parameters
NOTE: The GVRP Parameters screen applies to the
SRW2048 model ONLY.

Figure 5-14: Switch Configuration - GVRP Parameters

Figure 5-15: Switch Configuration - PVE Mapping

30