Figure 5-71: Snmp - Add Group Profile - Linksys SRW2016 User Manual

WebView Switches
To add an entry, click the paper and pencil icon. On the new screen that appears, you can configure the following
settings:
• Group Name. Enter a name for the user-defined group to which access control rules are applied. The field
range is up to 30 characters.
• Security Model. Defines the SNMP version attached to the group. The possible field values are:
• SNMPv1 - SNMPv1 is defined for the group.
• SNMPv2 - SNMPv2 is defined for the group.
• SNMPv3 - SNMPv3 is defined for the group.
• Security Level. Defines the security level attached to the group. Security levels apply to SNMPv3 only. The
possible field values are:
• No Authentication - Indicates that neither the Authentication nor the Privacy security levels are assigned
to the group.
• Authentication - Authenticates SNMP messages, and ensures the SNMP messages origin is
authenticated.
• Privacy - Encrypts SNMP message.
• Operation. Defines the group access rights. The possible field values are:
• Read - The management access is restricted to read-only, and changes cannot be made to the assigned
SNMP view.
• Write - The management access is read-write and changes can be made to the assigned SNMP view.
• Notify - Sends traps for the assigned SNMP view.
Click the Submit button to save your entry.
Chapter 5: Using the Web-based Utility for Configuration
SNMP Tab

Figure 5-71: SNMP - add Group Profile

76