Set The Ip Address - Lexmark C720 Setup Manual

Configuring and
Use the table to the right
to locate your next step.
netmask, and gateway
Note:
For instructions on other ways to
set the IP address, look on the Drivers,
MarkVision and Utilities CD. Click View
Documentation and look for the Mark-
Net link.
94 Configure the network printer
printing
TCP/IP

Set the IP address,

If you have more than one version of the Drivers,
MarkVision and Utilities CD, always use the latest
version.
For troubleshooting information, look on the Driv-
ers, MarkVision and Utilities CD. Click View Docu-
mentation and look for the MarkNet link.
If your network environment is...
TCP/IP
Novell NetWare
AppleTalk
OS/2 Warp Server
You must assign an IP address, netmask, and gate-
way to the print server for other network devices
to find the printer on the network.
• If you have DHCP, the proper address val-
ues are automatically assigned. To verify the
assignment has occurred, print a network
setup page and make sure the IP address,
netmask, and gateway appear as non-zero.
• If you don't have DHCP, there are other
methods you can use to manually assign the
address such as the printer operator panel,
static ARP and telnet, RARP and telnet,
BOOTP, MarkVision, or other Lexmark util-
ity. Instructions for these methods follow.
See page...
94
100
101
103