Change The Zone And Printer Name - Lexmark C720 Setup Manual

Note:
A PPD describes the printer or
printer family. For example, the PPD lists
which options are valid for the printer.
Change the zone and
Note:
MarkVision for Macintosh
resides on the Drivers, MarkVision and
Utilities CD
102 Configure the network printer
printer name
which zone to select, look on the network
setup page under AppleTalk for Zone.
3
Select the new printer. If you don't know
which printer to select, look on the net-
work setup page under AppleTalk. The
default name of the printer is listed beside
Name.
4
Click Create.
5
If you are prompted to select a PPD (Post-
Script Printer Description), you need to
install the proper PPD from the Drivers,
MarkVision and Utilities CD. To do this,
launch the CD, click Lexmark Installer,
select the appropriate PPD for your printer,
and then click Install. Go back to the
Chooser and try to create the new printer
again.
6
Look for an icon to appear in the Chooser
next to the printer name. This means you
have successfully set up the new printer. A
new desktop printer icon is placed on your
desktop, too.
7
In the Chooser, select the printer you want
to use now and close the Chooser window.
If you would like to use a zone and printer name
different from the defaults you can use MarkVi-
sion for Macintosh to change these settings. You
can also use the printer operator panel to change
the zone. (Hint: PARALLEL MENU, STD PARAL-
LEL, NETWORK 0 SETUP, APPLETALK, PARAL-
LEL X SETUP, Set Zone.)