Step 7: Install Supplies - Lexmark C720 Setup Manual

Step 7: Install supplies

Installing the oil bottle
and cleaning roll
Warning!
It takes approximately 30
minutes for the oil to reach the fuser after
initial oil bottle installation. Make sure the
oil bottle has been installed for at least
30 minutes before printing.
Note:
If a duplex unit is installed, open
the duplex unit top door also.
Your printer ships with an oil bottle and cleaning
roll that you must install to operate your printer.
Oil lubricates the fuser and the cleaning roll
removes excess toner and other contaminants
from the fuser.
Without oil, your fuser does not operate properly.
Insufficient lubrication causes paper jams and
reduces the life of your fuser. You must wait 30
minutes after installing the oil bottle before print-
ing.
To install the oil bottle and cleaning roll:
1
2
Top door
release latch
Slide the top door release latch toward the
front of the printer.
Lift the top door.
49
Install supplies