Power Consumption - Lexmark S315 User Manual

Notices
ENERGY STAR
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply
with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
Temperature information
Ambient temperature
Shipping and storage temperature

Power consumption

Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard‑copy output from electronic inputs.
Copy The product is generating hard‑copy output from hard‑copy original documents. 15.2
Scan The product is scanning hard‑copy documents.
Ready The product is waiting for a print job.
Sleep Mode The product is in a high‑level energy‑saving mode.
Off The product is plugged into a wall outlet, but the power switch is turned off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the
Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity.
15 to 32C (60 to 90F)
-40 to 60C (-40 to 140F), 1 to 60C (34 to 140F)
131
Power consumption
(Watts)
15.9
11.0
5.75
2.75
0.33