Printing Photos From A Memory Device Using The Printer Software - Lexmark Platinum Pro905 User Manual

3
Touch View Photos.
The Select Photos screen appears.
4
Touch the photo you want to edit.
5
Touch to view the selected photo.
Tips:
•
If you want to clear the selected photo, then touch
•
If you want to view the previous or next photo, then touch the left or right arrow, and then touch
the photo.
6
Touch . Touch Accept each time you make a selection.
From here
Crop
Brightness
Red Eye
Auto Fix
Color Effects
7
When you are finished editing the photo, touch Done.
8
If you want to edit another photo, then touch
9
Repeat steps 4 through 8 until all the photos are edited, and then touch Layout.
10
If you want to change the print settings, then touch Change Settings.
If necessary, touch Accept each time you make a selection.
11
Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.

Printing photos from a memory device using the printer software

1
Load photo paper.
2
Insert a memory card or flash drive.
3
Transfer or print the photos:
If the printer is using a USB connection
•
For Windows users
Fast Pics launches automatically when you insert the memory device. Follow the instructions on the computer
screen to transfer the photos to the computer or to print.
•
For Macintosh users
If you have set an application to launch when a memory device is connected to the computer, then the
application automatically launches. Follow the instructions on the computer screen to transfer the photos to
the computer or to print.
.
You can
Crop a photo.
Adjust the brightness of a photo.
Reduce the red-eye effect caused by light reflection.
Enhance a photo automatically.
Select whether to print a photo in black and white, sepia, antique brown, or
antique gray.
to return to the Select Photos screen.
Printing
46
to select