Limiting Access To The Processor Setup; Changing The User Access - Kodak X-Omat 3000 Operator's Manual

Limiting Access to the Processor Setup

Enabling the Limit Access feature prevents users from adjusting the Dryer temperature or changing the
processing cycle without first entering the access code. When this feature is selected, only those
operators who know the correct access code have the ability to change the dryer temperature or change
the processing cycle. While this feature is selected, the Cycle Change Switch on the feed end of the
Processor remains inactive.

Changing the User Access

[1] From the Walk-Up Menu, press the "GO TO SETUP" key.
READY
[2] Enter the 4-digit access code.
[3] Press the "MORE" key.
[4] Press the "OPTIONS" key.
[5] Press the "MORE" key.
[6] Press the "USER ACCESS" key.
[7] Press the "LIMIT ACCESS" key.
CURRENT ACCESS IS LIMITED
[8] Press the "DONE/RETURN" key repeatedly until you return to the display shown below. Then press the
"YES" key to return to the Walk-Up Menu.
EXIT SETUP?
5B6328 – 30SEP98
DRYER SLEEP
TEMP
1 2
INFO SETUP
REPLEN DAILY
MODE STARTUP
ACCESS USER
CODE ACCESS
LIMIT ALLOW
ACCESS ACCESS
YES
SELECT MORE
CYCLE
3 4
CYCLE MORE
OPTIONS
DISPLAY MORE
UNITS
TEMP MORE
LOCK
STD
GO TO
SETUP
CANCEL
REQUEST
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
CANCEL
REQUEST
13