Setting The Dryer Setpoint Temperature - Kodak X-Omat 3000 Operator's Manual

Setting the Dryer Setpoint Temperature

Description:
When selecting a Dryer temperature, always select the lowest temperature that still provides good film
drying. Films exiting the Processor should be "just dry" and cool to the touch in order to prevent
artifacts. You will find it necessary to adjust the Dryer temperature whenever you change the film
processing cycle and possibly when you change the type of film you are processing. You may choose
to have the Dryer temperature reading displayed in either metric units (degrees Celsius) or English units
(degrees Fahrenheit). To select the display units, see the procedure on Page 40.
Default Setting: 43°C (110°F)
Accepted Range: 21 - 66°C (70 - 150°F)
Procedure:
[1] From the Walk-Up Menu, press the "DRYER TEMP" key.
READY
[2] Use the up and down arrow keys to select the desired Dryer temperature.
120°F = DRYER SETPOINT
[3] Press the "DONE/RETURN" key repeatedly until you return to the Walk-Up Menu.
5B6328 – 30SEP98
DRYER SLEEP
TEMP
SELECT MORE
CYCLE
Basic Setup Options
STD
GO TO
SETUP
STD
DONE/
RETURN
25