Table of Contents
Advertisement
External Battery Usage
An external battery unit, the Honeywell PowerPak, is used to power a Mesh Router in fixed
installations or in situations where extended battery life is necessary. The connector from the
external battery screws into the Mesh Router's battery compartment. Bottom views of the Mesh
Router in its steel enclosure are shown in the procedure below.
1. Remove battery cover with the 3-pin end of the sensor and battery removal tool by turning
counterclockwise.
2. Lift off the cover.
3. Insert the power end of the cable connected to the Power Pak.
Mesh Router
62
User Manual
Advertisement
Table of Contents
