Honeywell Mesh Router User Manual page 43

Save your changes by pressing [Y/+].
l
Exit without saving changes by pressing [N/-].
l
Step back to the first digit by pressing [MODE].
l
Note:If you do not press a key within 60 seconds, the screen reverts to the programming Menu
screen showing Settings, Modem, and Exit.
Join Net
This screen is for joining an existing network. When you see this screen, press [MODE] to join a
network. This function allows the radio to scan all available channels and choose the least-
congested one:
The screen now displays a message asking if you want to confirm your choice to join a network:
Press [Y/+] to join a network and automatically find the best channel to operate on.
l
Press [N/-] to exit without joining a network.
l
While the instrument starts joining a network, this message appears:
Mesh Router 43 User Manual