Honeywell Mesh Router User Manual page 63

4. Use the open hex end of the wrench, and with both pins mated with the two holes on
the power end, tighten by turning clockwise until it is snug. Do not overtighten.
Consult the Honeywell PowerPak User's Guide for further connection and charging information.
The Mesh Router is permanently mounted to a solid surface by first securing it in its steel
enclosure (a screw through the back mates with the Mesh Router) and then securing the
enclosure to a solid surface such as a wall or the metal mounting plate that holds both the
Mesh Router and the Honeywell PowerPak.
Front, side, and rear views of the steel enclosure show how the Mesh Router is secured for
mounting.
With the Mesh Router securely in its housing, you can remove the cover over the battery
compartment so that you can place the connector from the Honeywell PowerPak into the Mesh
Router. Use the maintenance tool as shown.
Mesh Router 63 User Manual