Linking Charger To Account - Siemens VersiCharge SG Troubleshooting Manual

• Be sure to follow these three easy steps, and read how to create a username and password:
• Step 1: Select the grey check mark to indicate you have read the terms and conditions of use.
The check mark will turn blue when selected. Full terms and conditions may also be found at:
www.usa.siemens.com/VersiChargeSGApp .
• Step 2: Enter your name and address, this information is used to suggest utilities and rate plans based
on your location.
• Step 3: Create an account username and password; enter your email address so you are notified of
certain charge events. Note this information somewhere for later use (username and passwords are
case sensitive).
• Username: Minimum 4 characters and maximum of 10, must contain at least one letter, allowed special
characters !, $, _, and –
• Password: Minimum of 5 characters with suggested maximum of 12 characters, avoiding special
characters <, >, ", ', and ~

11.3 Linking charger to account

Power
Commissioning and Troubleshooting Guide VersiCharge™ SG
3 Easy steps:
Wi-Fi Status
37