Link Charger To Your Account (Residential Units Only) - Siemens VersiCharge AC 8EM1312-4AF10-0AA3 Installation And Operation Manual

Fill in email, password and select
Create.
NOTE:
• Username: Minimum four characters and maximum of ten, must contain at least
one letter, special characters allows: !, $, _, and –
• Password: Minimum of five characters with suggested maximum of 12
characters, avoiding special characters (<, >, ", ', and ~)

5.2 Link Charger to Your Account (Residential Units Only)

The following process links your VersiCharge to your chosen wireless network,
enabling communication with the Siemens Cloud network.
• Sign in or Create an Account.
• Follow steps 1 through 5 to link your charger to your account and manage your
charger using the Mobile App.
NOTE: 40A Unit Only - Before beginning to link the charger to an account,
ensure the breaker powering the dedicated branch circuit is 'OFF'; plug in
the VersiCharge. Turn breaker 'ON' after plugging the unit in.
• The Power Available LED will turn white and the Wi-Fi Status LED will go through
the following process:
v Indicator should initially slowly blink red and then switch to slowly blinking
yellow, then white.
v Once the indicator slowly blinks white the charger has transitioned to Access
Point mode (AP) and is ready to be connected to a Wi-Fi network.
• Once in AP mode, you may use your VersiCharge mobile app or your laptop to
commission the VersiCharge to a network with an open Internet connection to
establish connection to the Siemens VersiCloud system for management and to
receive periodic charger updates.
Select Ok when account is
successfully created.
Installation and Operations Manual | VersiCharge™ AC
23