Robertshaw RS10420T Installation Manual page 16

INSTALLER SETUP
Settings
The cooling fan delay setting delays
the fan from coming on in cool
Cooling Fan
mode and keeps it running after
Delay
the compressor shuts off for a
short time in order to save energy.
Heating
This setting establishes a maximum
Temperature
value above which the set-point
Set-Point
temperature value cannot be raised.
Limit
Cooling
This setting establishes a maximum
Temperature
value above which the set-point
temperature value cannot be
Set-Point
lowered.
Limit
Select F for Fahrenheit temperature
F° or C°
display or select C for Celsius
display.
14
Display Adjustment Options
The cooling fan delay can be set
to OFF, 15, 30, 60 or 90 seconds.
If 15, 30, 60 or 90 is selected, the
fan will not turn on for at least the
selected time when there is a call
for cool and will run for at least the
selected time after satisfying the
call for cool.
Use
the maximum heat temperature
set-point. The maximum heat
temperature set-point is 90°F.
Range 44°F - 90°F
Use
the maximum cool temperature
set-point. The minimum cool
temperature set-point is 44°F.
Range 44°F - 90°F
F OR C SET
°F for Fahrenheit
°C for Celsius
Default
or to select
or to select
OFF
90°
44°
F°