Robertshaw RS10420T Installation Manual page 18

INSTALLER SETUP
Settings
The thermostat can be configured
Beep
to make an audible beep when any
key is pressed.
This step shows the MAC address
MACID
of WiFi module.
This step shows the version of
Firmware
firmware that is installed on the
Version
thermostat.
Factory
This step resets all WiFi settings to
Default
factory default.
Reset
16
Display Adjustment Options
If ON is selected,
the beep will sound.
If OFF is selected,
the beep will be silenced.
Press NEXT to move to next step.
Press DONE to exit. Press and hold
TECH to enter ADVANCED TECH
STEPS.
Press YES to reset.
Default
ON