Getting Familiar With Your Gateway; Led Status Indicators - ADTRAN SMART/RG SR506n User Manual

Getting Familiar with your Gateway

This section contains descriptions of the SR506n gateway's lights, ports, and buttons.

LED Status Indicators

Your SmartRG gateway has several indicator lights (LEDs) on its exterior. The LED indicators are described below (from left to right).
INDICATOR ACTION DESCRIPTION
Power Device is powered on and operating normally.
Software is syncing.
The device is powered off.
DSL DSL link is established.
The DSL line is training.
The device is powered off.
Internet Internet link is established.
Data is being transmitted.
Internet interface is disconnected.
Authentication has failed.
LAN 1-4 Ethernet interface is connected.
Data is being transmitted.
Ethernet interface is disconnected.
USB 3G or USB flash disk is connected.
Data is being transmitted.
No signal is detected.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020 6