Table of Contents
Advertisement
1. In the left navigation bar, click
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Interface
Displays a list of available WAN interfaces. Complete the line item(s) associated with the inter-
face where you wish to employ RIP.
Version
Select the version of Routing Interface Protocol you desire. Reference RFC 1058 and RFC 1453
for detailed information on RIP versions. Options are: 1, 2, and Both.
Operation
This option is set to Passive and cannot be changed.
Enabled
Select to employ RIP on the displayed interface.
DNS
In this section, you can configure a DNS server, dynamic DNS and static DNS.
DNS Server
On this page, you can input the Domain Name Server (DNS) information supplied by your service provider.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
Advanced Setup
>
Routing
>
RIP,
and then click Add. The following page appears.
83
Advertisement
Table of Contents
