Table of Contents
Advertisement
Connections
Below is an illustration of the connectors located on the back of the SR506n gateway.
1
Buttons
On/Off Button
The On/Off button is located on the back of the gateway and turns the gateway on and off.
Reset Button
The Reset button is a small hole in the gateway's enclosure with the actual button mounted behind the surface. This style of push-
button prevents the gateway from being inadvertently reset during handling. Reset must be actuated with a paper clip or similar
implement.
The Reset button is located on the backleft side of the unit.
This pin-hole sized reset button has three functions. The duration for which the button is held dictates which function is carried out.
Hold Duration
Effect
Less than 6
Performs a modem reset that is equivalent to the
seconds
6-20 seconds
Performs the software equivalent to the
20 or more seconds Changes the POWER LED to red and the gateway enters CFE mode which is a state associated with performing
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
2
3
Restore Defaults
Reboot
function in the gateway software.
function in the gateway software.
7
Advertisement
Table of Contents
