Table of Contents
Advertisement
Logging in to your Gateway's UI
To manually configure the SmartRG gateway, access the gateway's embedded UI.
1. Open a Web browser on your computer.
2. Enter http://192.168.1.1 (the default IP address of the DSL gateway) in the address bar. The Authentication Required dialog
box appears.
3. Enter the admin user name and password. The default admin username/password are admin/admin. The default user-
name/password of the common user are user/user. It is recommended that you change these default values after logging in
to the DSL gateway for the first time.
4. Click OK. The gateway interface appears, showing the Device Info summary page.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2020
10
Advertisement
Table of Contents
