Table of Contents
Advertisement
Quick Links
About This Guide
This section describes the objectives, audience, organization, and conventions of the Cisco MGX Route
Processor Module (RPM-XF) Installation and Configuration Guide, Release 5.5.00.
Objectives
This publication provides instructions for the initial site preparation and installation of the
Cisco MGX Route Processor Module (RPM-XF). Troubleshooting, maintenance procedures, and cable
specifications are also provided.
Only basic software configuration information is included in this publication. For detailed software
configuration information, refer to the Cisco MGX 8850 and Cisco IOS configuration and command
reference publications. These publications are available on the Documentation CD-ROM that comes
with your RPM-XF, or you can order printed copies.
Audience
This document was written for engineers, users, network administrators, and technicians that are familiar
with Cisco MGX Series switches and Cisco routers. Readers should be familiar with electronic circuitry
and wiring practices.
Changes to this Document
Table 1
Table 1
Changes to This Guide Since the Previous Release
Section and Link
Chapter 9, "Configuring MPLS Features"
OL-13644-01
summarizes the changes made to this document since the previous release.
Status
Added
Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide
Description
•
Added new section:
Marking a GRE Tunnel Header for
Multicast Traffic, page
19.
xvii
Advertisement
Table of Contents
Related Manuals for Cisco RPM-XF
Summary of Contents for Cisco RPM-XF
-
Page 1: About This Guide
Objectives This publication provides instructions for the initial site preparation and installation of the Cisco MGX Route Processor Module (RPM-XF). Troubleshooting, maintenance procedures, and cable specifications are also provided. Only basic software configuration information is included in this publication. For detailed software configuration information, refer to the Cisco MGX 8850 and Cisco IOS configuration and command reference publications. - Page 2 Configuration Mode or AutoInstall. This chapter also explains how to configure and use 1:N redundancy on the RPM-XF. Describes how to configure the RPM-XF to operate as an edge router in a PNNI network.This chapter also explains how to configure all port adapter interfaces, followed by procedures for configuring PVCs and connections with other RPM-XFs.
- Page 3 To see translated versions of the warning, refer to the Regulator Compliance and Safety document that accompanied the device. OL-13644-01 boldface screen font. Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide font. screen...
-
Page 4: Warning Definition
Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide About This Guide OL-13644-01... -
Page 5: Class 1 Laser Product Warning
Non fissare il raggio con gli occhi né usare strumenti ottici per osservarlo direttamente. Advarsel Stirr eller se ikke direkte pŒ strŒlen med optiske instrumenter. Aviso Não olhe fixamente para o raio, nem olhe para ele directamente com instrumentos ópticos. OL-13644-01 Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide... -
Page 6: Related Documentation
Cisco MGX 8230 – Cisco MGX 8250 – Cisco MGX Release 5.5.00, for the Route Processor Modules (RPM-XF and RPM-PR) • Cisco WAN Manager Release 15.4. CWM Release 15 introduced a helpful new documentation • feature: web-based online help. To invoke online help, press F1 on a PC, press the Help key on a UNIX workstation, or select Help from the main or popup menu. - Page 7 Books and release notes in about which multiservice switch or media gateway the document supports. OL-13644-01 Table 2 are listed in order of use and include information Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide Table 2 are for the xxiii...
- Page 8 Document Title and Part Number Overview and Safety Documents Finding Cisco User Documentation Online DOC-7814807= Installation Warning Card DOC-7812348= Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxiv with SES 8230 Rel. 8250 Rel. 8850 Rel. 4 (PXM1) Rel.
- Page 9 — — — — — — — — — — — — — Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide 8830 8850 8850 8950 Rel. 5.5 (PXM1E) (PXM45) Rel. 5.5 Rel. 5.5 Rel. 5.5 — — —...
- Page 10 Configuration, Release 1.1.3 DOC-7811215= Cisco MGX 8250 Edge Concentrator Installation and Configuration, Release 1.1.3 DOC-7811217= Service Module Configuration and Reference Guides Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxvi with SES 8230 Rel. 8250 Rel. 8850 Rel. 4 (PXM1) Rel.
- Page 11 — — — — — — — — — — — — — Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide 8830 8850 8850 8950 Rel. 5.5 (PXM1E) (PXM45) Rel. 5.5 Rel. 5.5 Rel. 5.5 — — —...
- Page 12 Command Reference, Release 3 DOC-7814260= Cisco MGX 8800/8900 Series Command Reference, Release 5.2 Cisco WAN Manager SNMP Service Agent, Release 15.1 Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxviii with SES 8230 Rel. 8250 Rel. 8850 Rel. 4 (PXM1) Rel.
- Page 13 Description Describes how to find the manuals and release notes that support multiservice switches and network management products. These documents are available only online. Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide 8830 8850 8850 8950 Rel.
- Page 14 Cisco MGX 8230 Edge Concentrator Installation and Configuration, Release 1.1.3 DOC-7811215= Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide Description Contains precautions that you should take before you insert a card into a slot. This Warning Card ships with product.
- Page 15 MGX 8950 supports only serial bus-based service modules. The Cisco MGX 8880 uses a PXM45/C controller card, and supports only serial bus-based service modules. This hardware installation guide replaces all previous hardware guides for these switches. Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxxi...
- Page 16 Release 1 DOC-786122= Cisco SES PNNI Controller Command Reference, Release 3 DOC-7814260= Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxxii Description Describes how to configure the Cisco MGX 8880 Media Gateway. Also describes how to configure Cisco MGX 8850...
- Page 17 Provides new feature, upgrade, and compatibility information, as well as information about known and resolved anomalies. Provides new feature, upgrade, and compatibility information, as well as information about known and resolved anomalies. Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxxiii...
-
Page 18: Obtaining Documentation, Obtaining Support, And Security Guidelines
Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html Cisco MGX Route Processor Module (RPM-XF) Installation and Configuration Guide xxxiv Description Provides new feature and compatibility information, as well as information about known and resolved anomalies.