Adjusting The Needle Position Up/Down; Attaching The Stitch Plate - Bernina 570 QE User Manual

> Tap «Needle Information».
1
> Select the needle type (1) of the fitted needle.
> Select the needle type (2) of the fitted needle.

Adjusting the Needle Position Up/Down

> To bring the thread up, push the button «Needle position Up/Down».
– The needle is lowered and raised once.

Attaching the Stitch Plate

The stitch plate (Straight and CutWork Stitch Plate) has a small hole in the needle area. The stitch formation
(thread knotting of upper and bobbin thread) is thus optimized. This results in a more beautiful stitch
appearance.
> To lower the feed dog, push the button «Feed Dog Up/Down».
> Switch off the machine.
> Remove the needle.
> Remove the presser foot.
> At the marking on the upper right corner of the stitch plate, push the stitch plate downwards until it tips.
> Remove the stitch plate.
> Place the opening of the stitch plate (Straight and CutWork Stitch Plate) above the corresponding guide
pins and press it down until it clicks into place.
2
Embroidering Preparation
137