Adjusting The Presser Foot Position Via The Button "Presser Foot Up/Down; Changing The Presser Foot; Selecting The Presser Foot In The User Interface - Bernina 570 QE User Manual

Sewing Preparation
Adjusting the Presser Foot Position via the Button «Presser Foot Up/Down»
> To raise the presser foot, push the button «Presser Foot Up/Down».
> To lower the presser foot, push the button «Presser Foot Up/Down» again.

Changing the Presser Foot

> Raise the needle.
> Raise the presser foot.
> Switch the machine off.
> Push the clamping lever up (1).
> Remove the presser foot (2).
1
2
> Guide the new presser foot upwards over the cone.
> Press the clamping lever down.

Selecting the Presser Foot in the User Interface

After changing the presser foot, a check can be performed to determine whether it is suitable for the
selected stitch pattern. Additionally, alternative presser feet are displayed, which are available for the selected
stitch pattern.
> Switch the machine on.
> Select the stitch pattern.
> Tap «Presser Foot Indicator/Presser Foot Selection».
> To display all suitable presser feet for the selected stitch pattern, tap «Optional Presser Feet».
39