Adjusting The Maximum Embroidering Speed; Setting The Embroidery Design Position When Opening - Bernina 570 QE User Manual

Setup Program
> Tap «Home».
> Tap «Setup Program».
> Tap «Embroidery Settings».
> Tap «Adjusting the Upper Thread Tension».
> Adjust the upper thread tension.

Adjusting the Maximum Embroidering Speed

The maximum speed can be reduced by this function.
> Tap «Home».
> Tap «Setup Program».
> Tap «Embroidery Settings».
> Tap «Maximum Embroidery Speed».
RPM
> Set the maximum sewing speed.

Setting the Embroidery Design Position when Opening

As the default setting, opened embroidery designs are always displayed in the center of the hoop. You can
use the switch «Restore saved embroidery design position» to set that embroidery designs are opened at the
position in the hoop at which they had been saved in the BERNINA stitch software.
> Tap «Home».
> Tap «Setup Program».
> Tap «Embroidery Settings».
> Tap «Centering the Embroidery Design».
> To open the embroidery design at the saved position, set the switch «Restore saved embroidery design
position» to «I».
56