Bernina 570 QE User Manual page 172

Errors and Faults
Message on the Display
Not entough free capacity on the
BERNINA USB stick (optional
accessory).
172
Cause
The movement of the hoop
follows.
Mega Hoop top.
Mega Hoop center.
Mega Hoop bottom.
The embroidery design is partly
outside the hoop.
The embroidery design is too
large.
There is not enough free capacity
on the BERNINA USB stick
(optional accessory).
Repair
> Tap «Confirm».
> Bring the Mega Hoop to the top position.
> Bring the Mega Hoop to the center position.
> Bring the Mega Hoop to the lower position.
> Reposition the embroidery design and start
embroidering it again.
> Reduce the size of the embroidery design.
> Attach a larger hoop.
> Make sure that the BERNINA USB stick (optional
accessory) is used.
> Delete data from the BERNINA USB stick (optional
accessory).