Kyocera Mita KM-P4845w Operation Manual page 78

[Drawer] field: Selection is possible between "Auto Source Selection", "Drawer 1" (option), "Drawer 2",
"Drawer 3" and "Bypass Tray".
[Auto Rotation] field: Select the desired setting for the Auto Rotation function.
If you select [always enables Auto Rotation], Auto Rotation will be enabled regardless of the settings
made in the printer driver or Print Utility.
[Linear Measure Adjustment] settings: Adjust the 1:1 magnification ratio for each type of paper.
NOTE
The [Linear Measure Adjustment] settings will be invalid whenever you print with the [Auto Rotate]
function.
Page 3-16