Table of Contents
Advertisement
G Chooser Settings (Making the optional Drawer 1 available)
If you want to use the optional Drawer 1, continue with the settings procedure as follows.
6
Select the printer in the right side of the [Chooser] window and then click on the [Setup...] button.
7
Click on [Configure] in the resulting window.
8
Select "Installed" for the [Option Drawer 1] setting and then click on [OK].
9
Click on the box in the upper-left corner of the [Chooser] in order to close it.
Page 2-8
Advertisement
Chapters
Table of Contents
