Kyocera Mita KM-P4845w Operation Manual page 112

[Auto Rotation] radio buttons: Select whether or not you want to have the printed image automatically
rotated, as necessary, to fit onto the orientation of the presently set paper.
NOTE
If you want to use the [Linear Measure Adjustment] settings, turn [Auto Rotate] "OFF".
[Linear Measure Adjustment] can be set using the Web Manager interface.
[Image Placement] radio buttons: Select the basic location of the printed image on the paper. If you select
"Origin", the location of the image will be based on its relation to the lower left corner of the paper.
If you select "Center" the image will be centered on the paper.
NOTE
This setting is only applicable to HP-GL, HP-GL2 and HP-RTL file formats. When printing other file
formats, even if you select "Origin", the printed image will be centered on the paper.
[Unit] radio buttons: Select the desired unit of measure, either "mm" or "inch".
[Installation Option] setting: Be sure to put a check mark in the [Optional Drawer] checkbox when the
optional Drawer 1 is installed in the printer. if this box is not marked, you will not be able to select
Drawer 1 for printing.
Page 3-50