Table of Contents
Advertisement
[Option] screen
The [Option] screen allows you to make option-related settings. Be sure to click on the [Enter] button if you
change any settings.
[Max Error Retries] field: Set the number of times the printer will attempt to reprint after an error. Setting is
possible between 1 and 9999 times.
NOTE
The [Max Error Retries] field sets the number of times the printer will attempt to reprint after a
recoverable error occurs, such as when paper runs out or jams, toner runs out or a cover is left open.
The factory default setting for this is zero, and the printer will attempt to reprint indefinitely until
successful. (If a hardware problem occurs, the printer will not attempt to reprint.)
Page 3-15
Advertisement
Chapters
Table of Contents
