Kyocera Mita KM-P4845w Operation Manual page 17

9 Select the desired port. Since you will have to create a new port under "(3) Creating a New Port" later
on, select a temporary port here. The following procedure is explained as though [LPT1] has been
selected.
10 Click on [Next] and then continue the installation procedure by following each of the steps described
on-screen.
NOTE
When the message asking for [Pscript.dll] appears on-screen, enter
"D:\Drivers\English\Wide\NT4\i386" as the corresponding path.
("D" = Your CD-ROM drive)
Page 1-13