Scanner Page; Scanner> Defaults > Settings Page; Scanner> One Touch Keys > One Touch Keys Page - Kyocera KM-1815 Advanced Operation Manual

Scanner Page

This section includes settings that apply to the scanning function of the machine, such as default
scan resolution or original placement.
Settings that affect the machine, such as locking the operation panel, are found under the Basic
page.
In order to attach scanned data file to an e-mail and send it, the SMTP settings on the Advanced
page must be completed.
Scanner> Defaults > Settings Page
The table below provides a summary of the items displayed on Scanner Default Settings page.
Item
Scan Color/Exposure
Scan Resolution
Optimize for
Zoom
Original Placement
File Name
Scanner> One Touch Keys > One Touch keys Page
You can register e-mail addresses to send scan data to under 8 of the one-touch keys (numbers 1
through 8) on this machine.
In comparison with entering such addresses from the operation panel, registering e-mail addresses
in COMMAND CENTER using your computer keyboard is much more convenient.
Item
Key 1 (to Key 8)
Description
Switches the scanning resolution and exposure mode from Full
Color/Manual, Gray Scale/Manual, Monochrome/Manual, and
Monochrome/Auto.
Switches the scanning resolution between 200 × 200, 300 × 300,
400 × 400, and 600 × 600 (dpi). The maximum resolution using full
color or gray scale modes is 300 dpi. To scan in full color or gray
scale with 400 dpi or 600 dpi resolution, expansion the amount of the
internal memory is required. Refer to Chapter 5, Expansion
Memory in Basic Operation Guide.
The original quality is selected according to the type of original.
Switches the original quality between Text, Photo, and Text+Photo.
Switches the zoom ratio between Auto and 100 %. The default
setting is 100 %.
Switches between Top Edge to Rear and Top Edge to Left.
You can change the file name for the scan data. The default file
name is doc.
You can also have the time or the job number added to the file name
that you designate here. Refer to Entering the Name of Scan Job
on page 2-18.
Description
Registers e-mail addresses. E-mail addresses registered under a
one-touch key number here are saved to the same one-touch key
number in the machine's operation panel.
Using COMMAND CENTER
6-11