Using The Platen With Combine Mode - Kyocera KM-1815 Advanced Operation Manual

Copying Functions

Using the Platen with Combine Mode

The following explains how to make copies with the combine modes when the document processor
is not installed.
1
Set the first original to be copied.
2 Press the Copy key. The copy basic screen is displayed.
3
Select the combine mode. For more information, refer to page 1-14.
4 Press the Start key. The original is scanned.
5
Once the scanning operation is completed, Set
original and press Start key is displayed.
Position the next original on the Platen ready for
scanning and press the Start key. The next original is
scanned.
6 Repeat step 5 until all the originals have been scanned.
7
When all the originals have been scanned, press the
right select key. Accepted will appear and copying
commences.
1-18
Set original
*
and press Start key.
Job No.: 123
Page:
Cancel End Scan
Set original
*
and press Start key.
Job No.: 123
Page:
Cancel End Scan
1
6