Entering The Name Of Scan Job - Kyocera KM-1815 Advanced Operation Manual

Scanning Functions

Entering the Name of Scan Job

The scanning job is named depending the time stamp or serial number. Settings for name will be
applied to all scan jobs. The default file name is doc.
1
Press the E-Mail key. The scanner basic screen is displayed.
2 Press the Function key.
3 Press the
Entry and press the Enter key. The File Name
Entry screen is displayed.
4 Enter the desired file name.
Notes
•
•
5
Once the file name has been entered, press the Enter key. The Additional Info screen is
displayed.
6 Press the
that will be added to the file name and press the Enter
key. The message display shows Completed and
returns to the Function screen is displayed.
7
Press the right select key. The message display returns to the scanner basic screen.
2-18
key or the key to select File Name
The factory default setting for the file name is doc. Use COMMAND CENTER if you want to
change the default file name.
The file name can be between one and 30 characters long. Refer to Chapter 3 in Basic
Operation Guide, Character Entry.
key or the key to select the information
Function:
Continuous Scan
*
File Format
File Name Entry
Exit
File Name Entry:
doc
ABC
Cancel Text
Additional Info.:
*
None
* Date and Time
Job No.
Cancel