System Settings
3
Press the
setting that you want to change and press the Enter
key. The screen for the selected default setting is
displayed.
4
Press the
setting and press the Enter key. The message display
shows Completed and returns to the Function
Default screen.
Note
If you want to change the value for another default setting, repeat steps 3 and 4.
5
Press the Copy or E-Mail key. The basic screen is displayed.
6
Press the Reset key. The default values will be activated.
5-12
key or the
key to select the default
key or the
key to select the new default
Function Default:
Back
ScanColor Select
Scan Resolution
Exit
ScanColor Select:
Full Color
Grayscale
*
Monochrome
Cancel