Low Power Timer - Kyocera KM-1815 Advanced Operation Manual

System Settings

Low Power Timer

The machine has a Low Power Timer that is used to conserve power when the machine is not
copying, scanning, printing, or receiving data. You can adjust the timer timeout time, the length of
time (between 1 minute and 240 minutes) the machine waits before entering low power mode in the
absence of data. The factory default time is 5 minutes.
The machine wakes from low power mode whenever any one of the keys on the operator panel is
pressed, an original is set from document processor, the cassettes or MP tray are opened or closed,
or a print job is received.
1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2 Press the
Set and press the Enter key. The Date/Timer Set
screen is displayed.
3
Press the
Timer and press the Enter key. The Low Power
Timer screen is displayed.
4
Press the
time for the Low Power Timer to engage and press the
Enter key. The message display shows Completed
and returns to the Date/Timer Set screen.
5-26
key or the key to select Date/Timer
key or the key to select Low Power
key or the key to select the desired
Sys. Menu/Count.:
System Setting
Adjust
Date/Timer Set.
Exit
Date/Timer Set.:
Summer Time
Reset Timer
Low Power Timer
Exit
Low Power Timer:
(1 ~ 240)
10 min
Cancel