Scan Operation; Basic Scan; Multi Scan; Rescan - Kyocera KM-3650W Operation Manual

4.2 Scan Operation

4.2.1

Basic Scan

Place originals facing up on the Original Table.
Insert originals when KM-3650w is ready to scan.
Press the Start Key is required each time to start reading originals when "Auto Start" is
"OFF".
The default Auto Start time is 1.5 seconds. It is changeable at your option.
4.2.2

Multi Scan

Multi Scan is available to save several scan images as a single file.
A multi image files can contain up to 199 of originals.
The number of the originals you have scanned for Multi Scan is indicated in the upper right
of the screen.
After scanning the first page of the original, "Ready to Multi Scan" and "Press Enter to finish
scanning" are indicated by turns.
(Any original inserted to the scanner can prevent KM-3650w from starting printing.)
Press the Enter Key after scanning all the originals, and the scan image are saved as a
single file.
The number of scan originals will be eliminated after saving a file.
4.2.3

Rescan

Press the ReScan Key to replace the previous scan image with a new one.
26