Kyocera KM-3650W Operation Manual page 41

The message shown below is displayed when any setting is changed.
Applying the change requires KM-3650w's reboot.
Press the Enter Key and turn off KM-3650w.
Turn it on after an interval of 1 minute.
5.2.3.8.1 DHCP Server
Press the L1 Key repeatedly and specify whether a DHCP server exists on the network.
5.2.3.8.2 IP Address, Subnet Mask, Default Gateway
To configure the network settings, press the L2 Key to enter Network Settings (1).
Press R1 Key and L1 Key repeatedly to highlight an item for IP address.
Press R2 Key and L2 Key repeatedly for Subnet Mask.
Press R3 Key and L3 Key repeatedly for Default Gateway.
The highlighted item can be specified. Before change, press the Clear Key to clear the
value.
Enter a number with the Numeric keys.
Press the Enter Key to apply the configuration.
40