Interrupt Key; Recopy Key - Kyocera KM-3650W Operation Manual

2.7

Interrupt Key

Press the Interrupt Key to pause the current copy for an urgent copy.
The sign "Interrupt" is indicated in the upper right of the screen under Interrupt Mode.
Interrupt Key is used in Copy Mode except during printing a set copy.
Copy Key and ReCopy Key are available in Interrupt Mode.
Press the Interrupt Key again to cancel Interrupt Mode.
Interrupt Mode is not cancelled when finished copying automatically.
On canceling Interrupt Mode, the changes in Interrupt Mode are cancelled and the paused
jobs are carried out.
2.8

ReCopy Key

Press the ReCopy Key to make a copy of the previous copy/set copy job.
ReCopy Key cannot be effective during printing.
Recopy is disabled in case no image exists for recopy
Recopy is disabled, or requires a password entry with Recopy setting in Basic
Configuration.
is indicated on the bottom left when recopy is available.
is indicated when no recopy data exists or when recopy is not allowed.
Recopy permits to change the following settings.
•
Zoom
•
Paper Media
•
Copy Count
Set copy only permits to change the set copy count.
6