Image Type; Density; Media Source - Kyocera KM-3650W Operation Manual

The message shown below appears in case the media type setting is Vellum or Film.
When selected "Auto Size", it is impossible to select any media source of "Roll 1", "Roll 2"
and "Bypass".
3.3.1.2 Auto Zoom
A proper zoom ratio is automatically selected, considering the width of the original and
media, which fits the image to the media width,
To apply "Auto Zoom", press the L1 Key repeatedly for "Auto Zoom".
3.3.1.3 Manual
"Manual" enables an image to be printed on a given media source of "Roll 1", "Roll 2" and
"Bypass" at discretion manually.
Copying is carried out if the image is larger than the media, in such part of the image may
be lost.
To apply "Manual", press the L1 Key repeatedly for "Manual".
3.3.2

Image Type

The following settings are provided for the original image type.
"Line" is suitable for simple line originals.
"Line/Grayscale" is suitable for originals which include lines and areas of shade together.
"Grayscale" is suitable for photographic originals and areas of shade originals.
Press the R1 key repeatedly for a proper image type.

3.3.3 Density

Images are printed at an appropriate density on "Auto".
Press the L2 Key to lighten or R2 Key to darken the image manually.
3.3.4

Media Source

Images are printed on a specified media source of "Roll 1", "Roll 2" and "Bypass".
Press the L3 Key repeatedly for a proper media source.
13